# Bad MAC number 000000000509

**URL:** <https://community.qnap.com/t/bad-mac-number-000000000509/7157>\
**Category:** English\
**Created:** [October 9, 2026, 1:21pm UTC](https://community.qnap.com/t/bad-mac-number-000000000509/7157 "2026-10-09T13:21:52Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![BilleBarrett](https://community.qnap.com/user_avatar/community.qnap.com/billebarrett/32/6502_2.png) [@BilleBarrett](https://community.qnap.com/u/BilleBarrett)\
**Post date:** [October 9, 2026, 1:21pm UTC](https://community.qnap.com/t/bad-mac-number-000000000509/7157/1 "2026-10-09T13:21:52Z")

</div>

I can not log into this TS-230

---

<div class="post-metadata">

**Author:** ![dolbyman](https://community.qnap.com/user_avatar/community.qnap.com/dolbyman/32/136_2.png) [@dolbyman](https://community.qnap.com/u/dolbyman)\
**Post date:** [October 9, 2026, 1:34pm UTC](https://community.qnap.com/t/bad-mac-number-000000000509/7157/2 "2026-10-09T13:34:53Z")

</div>

Open a ticket with QNAP

---

<div class="post-metadata">

**Author:** ![dolbyman](https://community.qnap.com/user_avatar/community.qnap.com/dolbyman/32/136_2.png) [@dolbyman](https://community.qnap.com/u/dolbyman)\
**Post date:** [October 9, 2026, 10:50pm UTC](https://community.qnap.com/t/bad-mac-number-000000000509/7157/3 "2026-10-09T22:50:36Z")

</div>

If you know the old MAC Adress (sticker on the back)

You can reset it yourself (if the NAS still connects via that LAN port)

Login via SSH as admin and do:

`hal_app –se_sys_set_mac obj_index=0,value=0A:1B:2C:3D:4E:5F`

(where _0A:1B:2C:3D:4E:5F_ is the actual MAC address of your device from the sticker)

---

<div class="post-metadata">

**Author:** ![OneCD](https://community.qnap.com/user_avatar/community.qnap.com/onecd/32/156_2.png) [@OneCD](https://community.qnap.com/u/OneCD)\
**Post date:** [October 9, 2026, 11:02pm UTC](https://community.qnap.com/t/bad-mac-number-000000000509/7157/4 "2026-10-09T23:02:47Z")

</div>

I had this same thing happen on my TS-230.

It required remote-access by QNAP tech support to run some software on the NAS to re-program the MAC back into the mainboard.

Without this programming, the MAC will need to be reset after each bootup.

---

<div class="post-metadata">

**Author:** ![dolbyman](https://community.qnap.com/user_avatar/community.qnap.com/dolbyman/32/136_2.png) [@dolbyman](https://community.qnap.com/u/dolbyman)\
**Post date:** [October 9, 2026, 11:04pm UTC](https://community.qnap.com/t/bad-mac-number-000000000509/7157/5 "2026-10-09T23:04:01Z")

</div>

So the ticket is probably still the best idea

---

<div class="post-metadata">

**Author:** ![OneCD](https://community.qnap.com/user_avatar/community.qnap.com/onecd/32/156_2.png) [@OneCD](https://community.qnap.com/u/OneCD)\
**Post date:** [October 9, 2026, 11:04pm UTC](https://community.qnap.com/t/bad-mac-number-000000000509/7157/6 "2026-10-09T23:04:25Z")

</div>

I agree. 🤓

---

<div class="post-metadata">

**Author:** ![SteveKo](https://avatars.discourse-cdn.com/v4/letter/s/b3f665/32.png) [@SteveKo](https://community.qnap.com/u/SteveKo)\
**Post date:** [October 12, 2026, 9:38am UTC](https://community.qnap.com/t/bad-mac-number-000000000509/7157/7 "2026-10-12T09:38:51Z")

</div>

Please open a support ticket so our Support Team can check and fix the MAC address issue on your TS-230. Thanks!

[QNAP Helpdesk](https://service.qnap.com/)
