# \[FIRMWARE\] QuTS hero h5.2.2.2952 build 20241116 Released **URL:** \ **Category:** Firmware\ **Tags:** quts-hero\ **Created:** [November 19, 2024, 10:16am UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257 "2024-11-19T10:16:33Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![antik](https://community.qnap.com/user_avatar/community.qnap.com/antik/32/150_2.png) [@antik](https://community.qnap.com/u/antik)\ **Post date:** [November 19, 2024, 10:16am UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/1 "2024-11-19T10:16:33Z")
**NOTE: THIS FIRMWARE HAS BEEN REMOVED FOR SOME MODELS** > **[QNAP Addresses Recent QTS 5.2.2 Operating System Update Issues](https://www.qnap.com/en/news/2024/qnap-addresses-recent-qts-5-2-2-operating-system-update-issues)** > > Taipei, Taiwan, November 25, 2024 – QNAP® Systems, Inc. recently released the QTS 5.2.2.2950 build 20241114 operating system updat ... QuTS hero h5.2.2.2952 build 20241116 **Applicable Models** - TS-h2490FU/TS-h1090FU - TS-h1290FX - TDS-h2489FU - TS-h3088XU - TVS-h1288X/TVS-h1688X - TS-h987XU/TS-h987XU-RP/TS-h1887XU-RP/TS-h2287XU-RP/TS-h3087XU-RP - TS-h1886XU-RP/TS-1886XU-RP/TS-1886XU-RP R2/TS-h1886XU-RP R2 - TS-h686/TS-h886 - TNS-h1083X - TS-h1283XU-RP/TS-h1683XU-RP/TS-h2483XU-RP/TS-883XU/TS-983XU/TS-1283XU/TS-1683XU/TS-2483XU - TS-h977XU-RP/TS-h1277XU-RP/TS-h1677XU-RP/TS-h2477XU-RP - TS-h1277AXU/TS-h1677AXU-RP/TS-h3077AFU - TVS-h1675U-RP/TVS-h1275U-RP/TVS-h875U-RP/TVS-h875U - TVS-675 - TVS-h474/TVS-h674/TVS-h874/TVS-h874X/TVS-h674T/TVS-h874T - TBS-h574TX - TS-873AU/TS-873AU-RP/TS-1273AU-RP/TS-1673AU-RP/TS-873AeU/TS-873AeU-RP - TS-h973AX/TS-473A/TS-673A/TS-873A - TVS-672X/TVS872X/TVS-672N/TVS-872N/TVS-472XT/TVS-672XT/TVS-872XT - TS-1655/TS-855X - TS-855eU/TS-855eU-RP - X53E: TS-253E/TS-453E - TS-X64: HS-264,TBS-464,TS-364,TS-464,TS-664,TS-264,TS-464C2 - TS-X66: TS-466C - TS-X64U: TS-464U,TS-464U-RP,TS-1264U-RP,TS-464eU,TS-864eU,TS-864eU-RP - TS-i410X: TS-i410X,TS-410E - TS-h765eU **Security Updates** - Applied multiple security updates to further enhance system security. **Fixed Issues** - Fixed an issue where Safari users could not see the capacity of a connected external device in “Desktop \> Task Bar \> External Device”. - Fixed an issue where for certain expansion unit models, under certain circumstances a healthy disk on the expansion unit might incorrectly display a “Not Exist” status in “Storage & Snapshots \> Storage \> External Storage \> External Storage Device Management”. - Resolved an issue where after a firmware update, some users could not connect a LUN to an ESXi host via iSER. - Fixed an issue in the “Create a Snapshot Replication Job” wizard, where the connection test to the remote NAS would fail if the remote NAS had SFTP disabled. - Resolved an issue where under certain rare conditions, the system would display a storage pool error but not record a corresponding event log or provide further information on how to resolve the error. - Fixed an issue where users sometimes could not successfully add certain user accounts to the “Combined Permissions” list of a shared folder. - Resolved an issue for some users where after performing NAS migration under certain conditions, storage pools from the old NAS would display an “Error” status on the new NAS. - Fixed an issue where non-administrator users could not delete WORM files that were no longer in their retention period via an FTP client. - Fixed an issue where if a shared folder’s name contained certain special characters, the system would fail to record a corresponding log when the shared folder was accessed via Samba. - Fixed an issue for some users where Control Panel could not display domain users in “Privilege \> Users”. - Fixed a French translation issue in the Desktop Notice Board. - Fixed a rare issue where under certain conditions the NAS would fail to create a shared folder normally and then after a restart would take a long time to start up. - Improved system responsiveness when the NAS is accessed via SMB or a web browser. - Resolved a rare issue where under certain conditions a user might experience regular iSCSI disconnections and high latency between their NAS and a remote server. - Improved the ACL permissions mechanism. - Fixed an issue where after a firmware update, the system might mistakenly display an event log warning that the currently installed version of Advanced Network Driver was not supported. **Source:** [https://www.qnap.com/en/release-notes/quts\_hero/h5.2.2.2952/20241116](https://www.qnap.com/en/release-notes/quts_hero/h5.2.2.2952/20241116) ---
**Author:** ![Toxic](https://community.qnap.com/user_avatar/community.qnap.com/toxic/32/189_2.png) [@Toxic](https://community.qnap.com/u/Toxic)\ **Post date:** [November 19, 2024, 11:15am UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/2 "2024-11-19T11:15:54Z")
Pinned on November 19, 2024, 11:15am UTC ---
**Author:** ![Toxic](https://community.qnap.com/user_avatar/community.qnap.com/toxic/32/189_2.png) [@Toxic](https://community.qnap.com/u/Toxic)\ **Post date:** [November 20, 2024, 9:28am UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/3 "2024-11-20T09:28:35Z")
Unpinned on November 20, 2024, 9:28am UTC ---
**Author:** ![antik](https://community.qnap.com/user_avatar/community.qnap.com/antik/32/150_2.png) [@antik](https://community.qnap.com/u/antik)\ **Post date:** [November 22, 2024, 7:28am UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/4 "2024-11-22T07:28:17Z")
Looks like this QuTS hero fw build is available again. I see it as a downloadable option again: [https://www.qnap.com/en/download?model=tvs-h1288x&category=firmware](https://www.qnap.com/en/download?model=tvs-h1288x&category=firmware) ---
**Author:** ![Toxic](https://community.qnap.com/user_avatar/community.qnap.com/toxic/32/189_2.png) [@Toxic](https://community.qnap.com/u/Toxic)\ **Post date:** [November 22, 2024, 7:54am UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/5 "2024-11-22T07:54:41Z")
see here: > [@\*\*\*REMOVED\*\*\* \[FIRMWARE\] QTS 5.2.2.2950 build 20241114](https://community.qnap.com/t/removed-firmware-qts-5-2-2-2950-build-20241114/254/14): > > For some NAS models this firmware was reinstated (according to the German QNAP forum even with the same md5) ---
**Author:** ![Toxic](https://community.qnap.com/user_avatar/community.qnap.com/toxic/32/189_2.png) [@Toxic](https://community.qnap.com/u/Toxic)\ **Post date:** [November 25, 2024, 8:54am UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/6 "2024-11-25T08:54:30Z")
updated OP to post QNAPS response of removal of some models. ---
**Author:** ![howarmat](https://community.qnap.com/user_avatar/community.qnap.com/howarmat/32/197_2.png) [@howarmat](https://community.qnap.com/u/howarmat)\ **Post date:** [November 25, 2024, 8:53pm UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/7 "2024-11-25T20:53:16Z")
I have this installed on one TS-873A with no issues. Will update my main TVS-h874 tonight probably. ---
**Author:** ![howarmat](https://community.qnap.com/user_avatar/community.qnap.com/howarmat/32/197_2.png) [@howarmat](https://community.qnap.com/u/howarmat)\ **Post date:** [December 4, 2024, 11:13pm UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/8 "2024-12-04T23:13:57Z")
Installed fine on my h874 as well! ---
**Author:** ![Toxic](https://community.qnap.com/user_avatar/community.qnap.com/toxic/32/189_2.png) [@Toxic](https://community.qnap.com/u/Toxic)\ **Post date:** [January 10, 2025, 1:03pm UTC](https://community.qnap.com/t/firmware-quts-hero-h5-2-2-2952-build-20241116-released/257/9 "2025-01-10T13:03:37Z")
Closed on January 10, 2025, 1:03pm UTC