# QuTS hero 6.0 Public Beta -HBS3 sync differences

**URL:** <https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879>\
**Category:** QuTS hero h6.0 Beta\
**Tags:** service-ticket\
**Created:** [December 29, 2025, 10:16am UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879 "2025-12-29T10:16:12Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gunis](https://avatars.discourse-cdn.com/v4/letter/g/f4b2a3/32.png) [@Gunis](https://community.qnap.com/u/Gunis)\
**Post date:** [December 29, 2025, 10:16am UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/1 "2025-12-29T10:16:12Z")

</div>

I have NAS1 QTS 5.xxx and NAS2 QuTS Hero 6.xxx

I have HBS sync job NAS1 —\> NAS2 PUT it’s finished in 10min

But job NAS2 —\> NAS1 same job, same folders but GET, this job finished 39min.

Both NAS connected via 10Gb swith, both NAS has 10Gb Interfaces

There is TEST results.

 ![Screenshot From 2025-12-29 12-14-01](https://cdn-community.qnap.com/original/2X/d/dcc1accabef4538356441ecdaa0127ff62e47235.png)

 ![Screenshot From 2025-12-29 12-14-30](https://cdn-community.qnap.com/original/2X/4/47de287208dbd8a8e559b85f5606612218e16c6c.png)

---

<div class="post-metadata">

**Author:** ![dolbyman](https://community.qnap.com/user_avatar/community.qnap.com/dolbyman/32/136_2.png) [@dolbyman](https://community.qnap.com/u/dolbyman)\
**Post date:** [December 29, 2025, 2:05pm UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/2 "2025-12-29T14:05:35Z")

</div>

What are the NAS models in question? If one is significantly faster than the other, you would have the answer.

---

<div class="post-metadata">

**Author:** ![Gunis](https://avatars.discourse-cdn.com/v4/letter/g/f4b2a3/32.png) [@Gunis](https://community.qnap.com/u/Gunis)\
**Post date:** [December 29, 2025, 2:08pm UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/3 "2025-12-29T14:08:34Z")

</div>

There no question about models, there is difference between QTS and QuTS hero.

Same sync job but in one side PUT in other GET, but different results.

---

<div class="post-metadata">

**Author:** ![dolbyman](https://community.qnap.com/user_avatar/community.qnap.com/dolbyman/32/136_2.png) [@dolbyman](https://community.qnap.com/u/dolbyman)\
**Post date:** [December 29, 2025, 2:09pm UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/4 "2025-12-29T14:09:17Z")

</div>

But my question was specifically about models..are they the same ?

If so, then it’s purely a matter of ext vs ZFS file enumeration and handling

---

<div class="post-metadata">

**Author:** ![Gunis](https://avatars.discourse-cdn.com/v4/letter/g/f4b2a3/32.png) [@Gunis](https://community.qnap.com/u/Gunis)\
**Post date:** [December 29, 2025, 2:54pm UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/5 "2025-12-29T14:54:23Z")

</div>

Models TVS-474 and TVS-674T.

I will try to explain to you that there is no difference between the models here, as well as QTS or QuTS hero.  
The main thing is that the sync operation is different and three times more.  
Both NAS have nvme assembled as qtier.  
The idea is that before QuTS hero Upgrade from v5.xxx to 6.xxx copying was more or less the same, but now QuTS hero v6.xxx then copying is longer

---

<div class="post-metadata">

**Author:** ![dolbyman](https://community.qnap.com/user_avatar/community.qnap.com/dolbyman/32/136_2.png) [@dolbyman](https://community.qnap.com/u/dolbyman)\
**Post date:** [December 29, 2025, 3:34pm UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/6 "2025-12-29T15:34:14Z")

</div>

QuTS 6 is stil in beta..open a ticket then (if QNAP does not respond to this post)

---

<div class="post-metadata">

**Author:** ![Gunis](https://avatars.discourse-cdn.com/v4/letter/g/f4b2a3/32.png) [@Gunis](https://community.qnap.com/u/Gunis)\
**Post date:** [December 29, 2025, 3:48pm UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/7 "2025-12-29T15:48:01Z")

</div>

Hi @dolbyman I understood. I all time working ith QNAP via CRM system.

---

<div class="post-metadata">

**Author:** ![SteveKo](https://avatars.discourse-cdn.com/v4/letter/s/b3f665/32.png) [@SteveKo](https://community.qnap.com/u/SteveKo)\
**Post date:** [December 31, 2025, 8:23am UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/8 "2025-12-31T08:23:47Z")

</div>

Hi, thanks for the report! I’ll have our internal team look into this and try to reproduce the issue. Cheers!

---

<div class="post-metadata">

**Author:** ![SteveKo](https://avatars.discourse-cdn.com/v4/letter/s/b3f665/32.png) [@SteveKo](https://community.qnap.com/u/SteveKo)\
**Post date:** [January 5, 2026, 10:24am UTC](https://community.qnap.com/t/quts-hero-6-0-public-beta-hbs3-sync-differences/4879/9 "2026-01-05T10:24:36Z")

</div>

Hi, based on our internal testing, we haven’t been able to reproduce the sync speed difference you mentioned.

To help us investigate this further, would you mind opening a Support Ticket? This will allow our technical team to take a closer look at your specific environment and logs. Thanks!
