# REOLINK OMVI 3i PoE compatibility

**URL:** <https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287>\
**Category:** Surveillance\
**Created:** [June 24, 2026, 1:03pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287 "2026-06-24T13:03:43Z")\
**Posts on this page:** 14\
**Page:** 1

<div class="post-metadata">

**Author:** ![jwc34](https://avatars.discourse-cdn.com/v4/letter/j/ac8455/32.png) [@jwc34](https://community.qnap.com/u/jwc34)\
**Post date:** [June 24, 2026, 1:03pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/1 "2026-06-24T13:03:43Z")

</div>

I am looking to buy the REOLINK OMVI 3i PoE I do not see it on the compatibility list. I would like to know if it is in the process of being added or is there anybody using this camera now

---

<div class="post-metadata">

**Author:** ![NA9D](https://community.qnap.com/user_avatar/community.qnap.com/na9d/32/1278_2.png) [@NA9D](https://community.qnap.com/u/NA9D)\
**Post date:** [June 24, 2026, 2:13pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/2 "2026-06-24T14:13:23Z")

</div>

If the camera supports ONVIF, then it does not need to be on the compatibility list as ONVIF is an open standard that most camera manufacturers support. Now, maybe you won’t get all features over ONVIF depending on the profile they have implemented but you should get at least basic control.

---

<div class="post-metadata">

**Author:** ![haru0](https://community.qnap.com/user_avatar/community.qnap.com/haru0/32/174_2.png) [@haru0](https://community.qnap.com/u/haru0)\
**Post date:** [June 25, 2026, 1:33am UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/3 "2026-06-25T01:33:20Z")

</div>

> [@jwc34](#):
>
> not see it on the compatibility list.

Hi @jwc34 The integration for the REOLINK OMVI 3i PoE is already on our roadmap and being worked on.

You can absolutely set it up via ONVIF, just as @NA9D correctly suggested. But please note that while ONVIF covers basic controls, some advanced features might be limited until the official integration is complete.

Once the official firmware/update is released, you will be able to select the specific Reolink model directly from the setup list.

---

<div class="post-metadata">

**Author:** ![jiwbeam](https://avatars.discourse-cdn.com/v4/letter/j/41988e/32.png) [@jiwbeam](https://community.qnap.com/u/jiwbeam)\
**Post date:** [October 25, 2026, 9:25pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/4 "2026-10-25T21:25:34Z")

</div>

When will it be integrated ?

---

<div class="post-metadata">

**Author:** ![haru0](https://community.qnap.com/user_avatar/community.qnap.com/haru0/32/174_2.png) [@haru0](https://community.qnap.com/u/haru0)\
**Post date:** [October 27, 2026, 2:12am UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/5 "2026-10-27T02:12:09Z")

</div>

Hi @jiwbeam the REOLINK OMVI 3i will be integrated in QVR Surveillance 3.1.0 and it is testing.

The QVR Surveillance 3.1.0 should be release at Nov, I can provide you with a Beta version if needed.

---

<div class="post-metadata">

**Author:** ![jiwbeam](https://avatars.discourse-cdn.com/v4/letter/j/41988e/32.png) [@jiwbeam](https://community.qnap.com/u/jiwbeam)\
**Post date:** [November 3, 2026, 10:03pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/7 "2026-11-03T22:03:07Z")

</div>

Hi ! I am sorry to say, but i was trying to use qnap survelliance solution 5 years ago, and cameras was dissconecting all time. Now i tested it again with axis 3214, axis 3215, TP-link cw500 and Reolink Omvi 3 poe, and the survelliance camera is still dropping connection all time. I was thinking there had been som developing in this solution, but it is sadly completely useless. I will tomorrow return to my Synology Survelliance i have been used for years and that has not dropped any camera for 7 years. The reason for my change was that my qnap hardware was more powerful. Is there really people using this qnap survelliance solution ? I have a cisco 2960cx connected and there is almost no traffic from the cameras (they are mostly dissconnected). My nas have all updates.

---

<div class="post-metadata">

**Author:** ![NA9D](https://community.qnap.com/user_avatar/community.qnap.com/na9d/32/1278_2.png) [@NA9D](https://community.qnap.com/u/NA9D)\
**Post date:** [November 3, 2026, 10:37pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/8 "2026-11-03T22:37:37Z")

</div>

Yes. I use it with 4 cameras (all TP-Link). I have no issues with it dropping at all. It works quite well.

I was using a couple of Amcrest cameras and those were dropping off my network for some reason (had nothing to do with QNAP). I worked for several months with Amcrest support and they basically were like, “Well, it doesn’t work with your network. Send your camera back and we will refund your money.” So I did and they refunded it. Good customer service.

But the TP-Link cameras have been rock solid.

QVR Surveillance didn’t exist 5 years ago.

There’s got to be something in the settings causing the drops. I would open a ticket with QNAP.

---

<div class="post-metadata">

**Author:** ![jiwbeam](https://avatars.discourse-cdn.com/v4/letter/j/41988e/32.png) [@jiwbeam](https://community.qnap.com/u/jiwbeam)\
**Post date:** [November 3, 2026, 10:40pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/9 "2026-11-03T22:40:28Z")

</div>

Thanks, it might be some hardware problems with my qnap then…

---

<div class="post-metadata">

**Author:** ![NA9D](https://community.qnap.com/user_avatar/community.qnap.com/na9d/32/1278_2.png) [@NA9D](https://community.qnap.com/u/NA9D)\
**Post date:** [November 3, 2026, 10:41pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/10 "2026-11-03T22:41:46Z")

</div>

Or a settings configuration somehow. I would check with tech support.

---

<div class="post-metadata">

**Author:** ![jiwbeam](https://avatars.discourse-cdn.com/v4/letter/j/41988e/32.png) [@jiwbeam](https://community.qnap.com/u/jiwbeam)\
**Post date:** [November 3, 2026, 10:42pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/11 "2026-11-03T22:42:00Z")

</div>

No qvr was not there 5 years ago, but there was a survelliance solution, and that was dropping them also.

---

<div class="post-metadata">

**Author:** ![jiwbeam](https://avatars.discourse-cdn.com/v4/letter/j/41988e/32.png) [@jiwbeam](https://community.qnap.com/u/jiwbeam)\
**Post date:** [November 3, 2026, 10:47pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/12 "2026-11-03T22:47:55Z")

</div>

I only use half of poe power and i have turned of all recording. I have tested different settings on the cameras. Both in their settings and in qvr. I think i will buy a new synology since i have good experience of them. I also have licenses there. Thanks for your answers. My qnap is old also, 453be.

---

<div class="post-metadata">

**Author:** ![NA9D](https://community.qnap.com/user_avatar/community.qnap.com/na9d/32/1278_2.png) [@NA9D](https://community.qnap.com/u/NA9D)\
**Post date:** [November 4, 2026, 1:24pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/13 "2026-11-04T13:24:23Z")

</div>

Hmm. I have an old TS-451 and it chugs along nicely.

I would open a ticket with QNAP.

---

<div class="post-metadata">

**Author:** ![jiwbeam](https://avatars.discourse-cdn.com/v4/letter/j/41988e/32.png) [@jiwbeam](https://community.qnap.com/u/jiwbeam)\
**Post date:** [November 6, 2026, 5:02pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/14 "2026-11-06T17:02:12Z")

</div>

Aha, yes i have an TS-451 also, but that is a bit older 🙂 than 453 be.

---

<div class="post-metadata">

**Author:** ![NA9D](https://community.qnap.com/user_avatar/community.qnap.com/na9d/32/1278_2.png) [@NA9D](https://community.qnap.com/u/NA9D)\
**Post date:** [November 6, 2026, 7:38pm UTC](https://community.qnap.com/t/reolink-omvi-3i-poe-compatibility/6287/15 "2026-11-06T19:38:42Z")

</div>

Right. Like I said - open a ticket with QNAP…

😃
