# Virtualization Station loses USB connection

**URL:** <https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168>\
**Category:** Deutsch\
**Tags:** qts\
**Created:** [October 10, 2026, 3:50pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168 "2026-10-10T15:50:20Z")\
**Posts on this page:** 17\
**Page:** 1

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 10, 2026, 3:50pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/1 "2026-10-10T15:50:20Z")

</div>

Hello everyone,

I got a QNAP TS-453D at a good price. Everything is working fine and it’s up to date, but I’m having a problem with a virtual machine in Virtualization Station.

As soon as I shut down or restart the VM, it loses the USB connection.

The log always shows the following error message:

[Virtualization Station] The USB device connected to virtual machine “HomeAssistant” is missing or disconnected.

I’m running Home Assistant as the VM, and a ConBee stick for Zigbee is plugged in. This works without any issues while running.

Is there a solution for this problem? Or is it possible to find out the reason for this behavior somewhere in another log? I always have to manually add the stick again and restart the VM.

QTS is 5.2.10.3577

Virt. Station is 4.2.0.281 (20260812)

Best regards, and thanks in advance for your help.

Holger

---

<div class="post-metadata">

**Author:** ![dolbyman](https://community.qnap.com/user_avatar/community.qnap.com/dolbyman/32/136_2.png) [@dolbyman](https://community.qnap.com/u/dolbyman)\
**Post date:** [October 10, 2026, 4:21pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/2 "2026-10-10T16:21:07Z")

</div>

USB connections are always a problem on VMStation.

You could try seeing if you can mount them permanently via virsh… but be careful: if you edit the VM in the GUI, all changes will be overwritten (I had to do this once for a “nested” Proxmox — the network adapters from the GUI were all incompatible).

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 10, 2026, 5:01pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/3 "2026-10-10T17:01:09Z")

</div>

Ok, so virsh directly via SSH to a NAS?

I switched from Proxmox to have everything in one place (previously NAS and mini PC). It worked great there for years.

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 10, 2026, 5:06pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/4 "2026-10-10T17:06:47Z")

</div>

Ah, just found it, I’ll give it a try tomorrow.

But basically, I’m just changing the VM’s config now, just not through the GUI, right?

---

<div class="post-metadata">

**Author:** ![dolbyman](https://community.qnap.com/user_avatar/community.qnap.com/dolbyman/32/136_2.png) [@dolbyman](https://community.qnap.com/u/dolbyman)\
**Post date:** [October 10, 2026, 5:35pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/5 "2026-10-10T17:35:03Z")

</div>

Exactly, every time you change anything else via the GUI, the settings you made with virsh get overwritten.

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 11, 2026, 11:53am UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/6 "2026-10-11T11:53:40Z")

</div>

I can’t get it mounted via virsh either… or rather, after every reboot it gets removed again.

I compared the dumpxml before and after the reboot. The following entries are deleted:

```auto
<qvs:usbs>
  <qvs:usb bus_num="1" dev_num="24" vendor_id="1cf1" product_id="0030" index="1"/>
</qvs:usbs>

```

and

```auto
<hostdev mode='subsystem' type='usb' managed='no'>
      <source startupPolicy='optional'>
        <vendor id='0x1cf1'/>
        <product id='0x0030'/>
        <address bus='1' device='24'/>
      </source>
      <alias name='hostdev0'/>
      <address type='usb' bus='0' port='2'/>
</hostdev>

```

Using **lsusb** , the stick is always present on the NAS

```auto
[Holger@HomeNAS ~]$ lsusb                                                                                             
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 024: ID 1cf1:0030  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

```

I also find it odd that the bus number increases each time I reconnect…

![grafik](https://cdn-community.qnap.com/original/2X/f/f0c75508bbef034af4ce9741bc185990f0b3d870.png)

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 11, 2026, 11:54am UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/7 "2026-10-11T11:54:47Z")

</div>

I’ve now opened a ticket with QNAP too… Let’s see what they say…

---

<div class="post-metadata">

**Author:** ![manni\_das\_mammut](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@manni\_das\_mammut](https://community.qnap.com/u/manni_das_mammut)\
**Post date:** [October 11, 2026, 2:19pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/8 "2026-10-11T14:19:47Z")

</div>

I suspect that the stick isn’t compatible. I use my HomeAssistant with a Sonoff Stick, and it works without any problems.

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 11, 2026, 3:38pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/9 "2026-10-11T15:38:23Z")

</div>

Well, the stick itself works perfectly. I can control everything in HA with it and so on… The only issue was that the QNAP VM forgets it every time I restart everything.

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 11, 2026, 4:04pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/10 "2026-10-11T16:04:11Z")

</div>

Ok, maybe it really is the stick after all. I just tested it with a Logi receiver and a USB stick, and they both stay connected even after a reboot…

Still, I find it really weird. I’m curious to see what the official support will say.

@manni_das_mammut which Sonoff do you have? I was thinking about getting one a while ago too. But until now, the ConBee had always worked for me.

---

<div class="post-metadata">

**Author:** ![Becker2020](https://avatars.discourse-cdn.com/v4/letter/b/ea5d25/32.png) [@Becker2020](https://community.qnap.com/u/Becker2020)\
**Post date:** [October 11, 2026, 4:10pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/11 "2026-10-11T16:10:30Z")

</div>

Hi,

which USB port are you using?

For a while, I had my keyboard and mouse connected via a USB hub. There were absolutely no problems.

---

<div class="post-metadata">

**Author:** ![manni\_das\_mammut](https://avatars.discourse-cdn.com/v4/letter/m/e9c0ed/32.png) [@manni\_das\_mammut](https://community.qnap.com/u/manni_das_mammut)\
**Post date:** [October 11, 2026, 6:41pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/12 "2026-10-11T18:41:38Z")

</div>

Model: ZBDongle-E

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 11, 2026, 7:40pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/13 "2026-10-11T19:40:16Z")

</div>

I tried all the ports and connected the stick directly, without any extension or anything like that.

---

<div class="post-metadata">

**Author:** ![SteveKo](https://avatars.discourse-cdn.com/v4/letter/s/b3f665/32.png) [@SteveKo](https://community.qnap.com/u/SteveKo)\
**Post date:** [October 13, 2026, 9:57am UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/14 "2026-10-13T09:57:40Z")

</div>

Feel free to take a look at the following FAQ. If you have any questions, you’re welcome to bring them up for discussion here. Thank you!

[Why is my virtual machine unable to recognize or effectively use USB devices? | QNAP](https://www.qnap.com/de-de/how-to/faq/article/why-is-my-virtual-machine-unable-to-recognize-or-effectively-use-usb-devices)

_(Translated with AI)_

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [October 27, 2026, 8:02am UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/15 "2026-10-27T08:02:17Z")

</div>

Hi everyone,

In the meantime, I’ve opened a ticket with QNAP support and the case has been forwarded to the development department, as it really is a software issue on the NAS side.

Their feedback was as follows:

> When restarting your HomeAssistant VM, the ConBee II stick is recognized again by the NAS and receives a new USB device number.
> 
> However, Virtualization Station still tries to access the previous device assignment. Since that no longer exists, the automatic USB connection fails.
> 
> …

Since I’ve now switched to a Sonoff stick, it’s not such a big deal anymore 🙂 as it always stays connected.

As soon as I have any updates from support, I’ll let you know.

---

<div class="post-metadata">

**Author:** ![Holger2802](https://avatars.discourse-cdn.com/v4/letter/h/3da27b/32.png) [@Holger2802](https://community.qnap.com/u/Holger2802)\
**Post date:** [November 17, 2026, 9:42pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/16 "2026-11-17T21:42:34Z")

</div>

Hi everyone,

As QNAP support and the development team confirmed, there is an issue with the NAS software.

> The issue with the **ConBee USB stick** has been identified as a bug in Virtualization Station.
> 
> After a USB interruption, Virtualization Station loses the connection between the ConBee stick and the virtual machine.
> 
> The fix is included in **Virtualization Station 4.2.1** and later. Version **4.2.1.127** has not yet been released.

Best regards

Holger

---

<div class="post-metadata">

**Author:** ![Becker2020](https://avatars.discourse-cdn.com/v4/letter/b/ea5d25/32.png) [@Becker2020](https://community.qnap.com/u/Becker2020)\
**Post date:** [November 18, 2026, 4:08pm UTC](https://community.qnap.com/t/virtualization-station-verliert-usb-verbindung/7168/17 "2026-11-18T16:08:25Z")

</div>

The new version of VS is already here.

> **[Release Notes for Apps](https://www.qnap.com/de-de/app-release-notes?app=QKVM&product-line=nas)**
>
> QNAP entwickelt und liefert hochqualitative Network Attached Storage Systeme (NAS) und professionelle Netzwerk Video Rekorder (NVR) für Anwendungen im Heimbereich, für Lösungen bei Klein- /Mittelständische Unternehmen und für Einsätze der Industrie.

[https://download.qnap.com/QPKG/QVS\_4.2.1.127\_20261104\_amd64.zip](https://download.qnap.com/QPKG/QVS_4.2.1.127_20261104_amd64.zip)
