QuObjects S3 and Duplicati - Local network?

I am attempting to backup an Ubuntu workstation from Duplicati to a local NAS running QuObjects.

I am able to get this working without SSL but not with SSL (HTTPS). Any thoughts? Maybe something to do with the server and workstation being on the same local, internal network? I am using the default QNAP Server Certificate but don’t have a Custom Root Certificate

Thanks

If both devices are on your LAN, why do you need HTTPS? :wink:

It’s not like someone is going to eavesdrop or MITM your connection.

As @OneCD said, there’s likely little need to have SSL on your LAN. For SSL to work correctly, things have to match the certificate with domain names, etc. Certificates are a headache. Unless you are in some corporate environment that needs security on your LAN, then just skip SSL.

Hi @TeePee3NAS,

Being on the same local network is not the problem. QuObjects uses the same SSL certificate as the NAS (QTS), and it is reachable over HTTPS from any client that can reach the NAS.

The most likely reason HTTPS fails while HTTP works is the certificate itself. The default QNAP Server Certificate is self-signed and is not issued to your NAS’s hostname or IP address, so a client like Duplicati that validates certificates will refuse it. Once the NAS has a certificate that your client trusts and that matches the address you connect to, QuObjects will work over HTTPS as well.

How to set it up: please follow the FAQ below to install a valid certificate on the NAS.
How do I install a Let’s Encrypt SSL certificate for my custom DDNS domain in QTS?

If you only use the NAS on your LAN, HTTP is also fine, as suggested above. If HTTPS still fails, please share the exact Duplicati error message and your QTS/QuObjects versions.

That’s very helpful, as were the previous replies. Thanks to you all!