risk of failure predictive migration on new disks

English Storage
1

I was going to create a volume on my 8-bay TL-D800C connected to a TVS-874 but by default, I can’t select any of the 8 disks (Seagate IronWolf Pro 30TB) and errored with “risk of failure… predictive migration on disks”
Seagates own and the SMART test come back good health on both disks.

Any pointers?

2

Hi, quick question: do you still need the data on the drives in your TL enclosure?

  • If you don’t need the data: Simply connect the drives to a Windows PC and use Disk Management to wipe all partitions. Once cleared, plug them back into the NAS and they should be ready to use.

  • If you need the data (and it’s from a QNAP NAS): You can try the “Attach and Recover” feature as shown in the image below.

image
image1920×390 67.5 KB

  • If the data is NOT from a QNAP NAS: This gets a bit more complicated. To ensure your data stays safe, it’s best to open a support ticket and let us take a closer look.

Let us know how it goes!

3

This worked! THANK YOU.