こんにちは、
新しいTS-673AにQuTS heroをインストールしました。
最初は問題なく動作していましたが、外付けSSDからNASへ約800GBのデータをコピーしようとしたところ、NASが再現性のあるクラッシュ／再起動を起こします。
最初はカスタムRAM（32GBのECC RAM）に問題があるのかと思いましたが、元の8GBでも同じ問題が発生します。
再起動後に表示されるエラーは次の通りです：
[Power] 前回、システムが正しくシャットダウンされませんでした。
OSはQuTS hero h5.2.6.3195です。
外付けドライブはSandisk Extreme Portable SSD 1TBです。
さらにデバッグする方法について、何かアイデアはありますか？適切なグラフィックカードがないため、BIOSメッセージなどを確認することができません。
SSHでログインできる場合は、dmesgを確認してエラーが出ていないか確認してください。
できますが、NASを再起動した後はエラーがありません。
追加情報をお願いするプライベートメッセージを送信しました。これらの詳細をご提供いただくことで、問題の理解と迅速な解決に役立ちます。
まったく同じ問題が発生しています。
外付けUSB 3.0ハードディスクドライブ
TS-653D; QTS 5.2.4.3079
このドライブにバックアップを作成し、ボリュームの再構成後に書き戻そうとしています。
コピーは開始されますが、数分後に
「[電源] 前回、システムが正しくシャットダウンされませんでした。」
という通知／メールが届きます。
コピータスクをFile Station、Qfileアプリ、またはsshとcpコマンドで開始しても、状況は変わりません。
dmesgの出力はどうですか？
システムにサードパーティ製または増設されたRAMはありますか？
どこを見ればいいのか正直よくわかりませんが、これが私の注意を引きました。
I don’t realy know what to expect… it goes on like:
[ 17.663372] ata20: SATA link down (SStatus 0 SControl 330)
[ 17.669796] [Hardware Error]: 00000890: 008f9ac4 00000000 80000461 00000000 ........a.......
[ 17.669797] [Hardware Error]: 000008a0: 00000000 00000000 008f9cf9 00000000 ................
[ 17.669799] [Hardware Error]: 000008b0: 800004a5 00000000 00000000 00000000 ................
[ 17.701378] [Hardware Error]: 000008c0: 008f9d3f 00000000 e00004a9 00000006 ?...............
[ 17.710078] [Hardware Error]: 000008d0: 00000006 00000000 008f9fb4 00000000 ................
[ 17.710245] snd_hda_intel 0000:00:0e.0: Codec #0 probe error; disabling it...
[ 17.718779] [Hardware Error]: 000008e0: e00004db 00000000 00002710 00002710 .........'...'..
[ 17.718781] [Hardware Error]: 000008f0: 008f9ff3 00000000 e00004db 00000001 ................
[ 17.735426] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input4
[ 17.743309] [Hardware Error]: 00000900: 0002bf20 00050910 008fa032 00000000 .......2.......
[ 17.743311] [Hardware Error]: 00000910: e00004db 00000002 0052bf20 00550910 ........ .R...U.
[ 17.752624] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input5
[ 17.761234] [Hardware Error]: 00000920: 008fa072 00000000 e00004db 00000003 r...............
[ 17.761236] [Hardware Error]: 00000930: 0057ef40 005a3930 0c9f89f8 00000022 @.W.09Z....."...
[ 17.770014] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input6
[ 17.779149] [Hardware Error]: 00000940: c000104c 00004010 00004010 00000000 L....@...@......
[ 17.779151] [Hardware Error]: 00000950: 008f9b18 00000000 80000461 00000000 ........a.......
[ 17.787932] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input7
[ 17.796552] [Hardware Error]: 00000960: 00000000 00000000 008f9d4c 00000000 ........L.......
[ 17.796554] [Hardware Error]: 00000970: 800004a5 00000000 00000000 00000000 ................
[ 17.796556] [Hardware Error]: 00000980: 008f9d92 00000000 e00004a9 00000006 ................
[ 17.805857] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input8
[ 17.814475] [Hardware Error]: 00000990: 00000006 00000000 008fa003 00000000 ................
[ 17.814477] [Hardware Error]: 000009a0: e00004db 00000000 00002710 00002710 .........'...'..
[ 17.885173] [Hardware Error]: 000009b0: 008fa042 00000000 e00004db 00000001 B...............
[ 17.893872] [Hardware Error]: 000009c0: 0002bf20 00050910 008fa082 00000000 ...............
[ 17.902572] [Hardware Error]: 000009d0: e00004db 00000002 0052bf20 00550910 ........ .R...U.
[ 17.911268] [Hardware Error]: 000009e0: 008fa0c1 00000000 e00004db 00000003 ................
[ 17.919970] [Hardware Error]: 000009f0: 0057ef40 005a3930 a5a6a678 00000090 @.W.09Z.x.......
[ 17.928666] [Hardware Error]: 00000a00: c000104c 00004010 00004010 00000000 L....@...@......
[ 17.937368] [Hardware Error]: 00000a10: 008f97af 00000000 80000461 00000000 ........a.......
[ 17.946063] [Hardware Error]: 00000a20: 00000000 00000000 008f99e4 00000000 ................
[ 17.954760] [Hardware Error]: 00000a30: 800004a5 00000000 00000000 00000000 ................
[ 17.963458] [Hardware Error]: 00000a40: 008f9a2a 00000000 e00004a9 00000006 *...............
[ 17.972156] [Hardware Error]: 00000a50: 00000006 00000000 008f9c9b 00000000 ................
[ 17.980856] [Hardware Error]: 00000a60: e00004db 00000000 00002710 00002710 .........'...'..
[ 17.989553] [Hardware Error]: 00000a70: 008f9cdb 00000000 e00004db 00000001 ................
[ 17.991371] ata21: SATA link down (SStatus 0 SControl 330)
[ 17.998249] [Hardware Error]: 00000a80: 0002bf20 00050910 008f9d1a 00000000 ...............
[ 17.998251] [Hardware Error]: 00000a90: e00004db 00000002 0052bf20 00550910 ........ .R...U.
[ 17.998253] [Hardware Error]: 00000aa0: 008f9d59 00000000 e00004db 00000003 Y...............
[ 18.029839] [Hardware Error]: 00000ab0: 0057ef40 005a3930 00000000 00000000 @.W.09Z.........
[ 18.038536] [Hardware Error]: 00000ac0: 00000000 00000000 00000000 00000000 ................
[ 18.047234] [Hardware Error]: 00000ad0: 00000000 00000000 00000000 00000000 ................
[ 18.055937] [Hardware Error]: 00000ae0: 00000000 00000000 00000000 00000000 ................
[ 18.064635] [Hardware Error]: 00000af0: 00000000 00000000 00000000 00000000 ................
[ 18.073368] PM: Magic number: 9:826:575
[ 18.077683] workqueue: hash matches
[ 18.081364] ALSA device list:
[ 18.084345] #0: HDA Intel PCH at 0xa1a10000 irq 146
[ 18.128938] sde: sde1 sde2 sde3 sde4 sde5
[ 18.133419] sd 14:0:0:0: [sde] Attached SCSI disk
[ 18.138156] Check proc_name[ahci].
[ 18.141575] Check proc_name[ahci].
[ 18.312386] ata22: SATA link down (SStatus 0 SControl 330)
[ 18.624389] ata23: SATA link down (SStatus 0 SControl 330)
[ 18.936385] ata24: SATA link down (SStatus 0 SControl 330)
[ 19.248386] ata25: SATA link down (SStatus 0 SControl 330)
[ 19.560386] ata26: SATA link down (SStatus 0 SControl 330)
[ 19.566000] Check proc_name[ahci].
[ 19.569416] scsi 26:0:0:0: Direct-Access WDC WD120EFBX-68B0EN 85.0 PQ: 0 ANSI: 5
[ 19.577609] ata27.00: set queue depth = 32
[ 19.581754] scsi 26:0:0:0: Serial Number: D7JU8AGN
[ 19.587689] Check proc_name[ahci].
[ 19.587696] Check proc_name[ahci].
[ 19.591111] Check proc_name[ahci].
[ 19.594554] sd 26:0:0:0: Attached scsi generic sg5 type 0
[ 19.597932] Check proc_name[ahci].
[ 19.597994] sd 26:0:0:0: [sdf] 23437770752 512-byte logical blocks: (12.0 TB/10.9 TiB)
[ 19.614671] sd 26:0:0:0: [sdf] 4096-byte physical blocks
[ 19.619999] sd 26:0:0:0: [sdf] Write Protect is off
[ 19.624894] sd 26:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 19.624907] sd 26:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.681731] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
[ 19.686159] sd 26:0:0:0: [sdf] Attached SCSI disk
[ 19.690873] Check proc_name[ahci].
[ 19.694288] Check proc_name[ahci].
[ 19.912384] ata28: SATA link down (SStatus 0 SControl 330)
[ 20.224385] ata31: SATA link down (SStatus 0 SControl 330)
[ 20.536387] ata32: SATA link down (SStatus 0 SControl 330)
[ 20.848389] ata33: SATA link down (SStatus 0 SControl 330)
[ 21.160410] ata34: SATA link down (SStatus 0 SControl 330)
[ 21.472393] ata35: SATA link down (SStatus 0 SControl 330)
[ 21.784401] ata36: SATA link down (SStatus 0 SControl 330)
[ 22.096402] ata37: SATA link down (SStatus 0 SControl 330)
[ 22.408399] ata38: SATA link down (SStatus 0 SControl 330)
[ 22.414509] Freeing unused kernel image (initmem) memory: 1536K
[ 22.420435] Write protecting the kernel read-only data: 24576k
[ 22.426802] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 22.433784] Freeing unused kernel image (rodata/data gap) memory: 1888K
[ 22.440569] Run /init as init process
[ 22.444244] with arguments:
[ 22.444245] /init
[ 22.444245] with environment:
[ 22.444246] HOME=/
[ 22.444247] TERM=linux
[ 22.444248] intel_iommu=on,igfx_off
[ 22.444249] BOOT_IMAGE=/boot/bzImage
[ 22.742219] RTC_TIME:Thu Sep 11 09:34:02 2025 0.000000 seconds
[ 22.750489] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 22.757952] ehci-pci: EHCI PCI platform driver
[ 22.763510] uhci_hcd: USB Universal Host Controller Interface driver
[ 22.771056] usbcore: registered new interface driver usblp
[ 22.779683] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 22.784929] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
[ 22.793410] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[ 22.802574] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 22.809675] hub 1-0:1.0: USB hub found
[ 22.813462] hub 1-0:1.0: 9 ports detected
[ 22.818616] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 22.823853] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
[ 22.831257] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 22.837655] hub 2-0:1.0: USB hub found
[ 22.841496] hub 2-0:1.0: 7 ports detected
[ 23.062248] usb 1-6: new low-speed USB device number 2 using xhci_hcd
[ 23.254816] usbcore: registered new interface driver usb-storage
[ 23.261943] usbcore: registered new interface driver uas
[ 23.262705] hid-generic 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS XS 700U FW:924.Z5 .I USB FW:Z5 ] on usb-0000:00:15.0-6/input0
[ 23.294403] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.02.00.103-k.
[ 23.306537] mpt3sas: loading out-of-tree module taints kernel.
[ 23.313294] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 23.320460] mpt3sas version 33.00.00.00 loaded
[ 23.333949] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 23.340158] usb-storage 2-1:1.0: Quirks match for vid 174c pid 55aa: 400000
[ 23.347187] scsi host38: usb-storage 2-1:1.0
[ 23.735730] e1000e: Intel(R) PRO/1000 Network Driver
[ 23.740712] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 23.749067] igb: Intel(R) Gigabit Ethernet Network Driver
[ 23.754475] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 23.763751] usbcore: registered new interface driver r8152
[ 23.865766] Intel(R) 2.5G Ethernet Linux Driver
[ 23.870334] Copyright(c) 2018 Intel Corporation.
[ 23.875013] igc 0000:08:00.0: enabling device (0000 -> 0002)
[ 23.937215] igc 0000:08:00.0 (unnamed net_device) (uninitialized): PHC added
[ 24.004670] igc 0000:08:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 24.012858] igc 0000:08:00.0 eth0: MAC: 24:5e:be:68:37:77
[ 24.018344] igc 0000:0c:00.0: enabling device (0000 -> 0002)
[ 24.071148] igc 0000:0c:00.0 (unnamed net_device) (uninitialized): PHC added
[ 24.129158] igc 0000:0c:00.0: 4.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x1 link)
[ 24.137345] igc 0000:0c:00.0 eth1: MAC: 24:5e:be:68:37:76
[ 24.197976] gasket: module is from the staging directory, the quality is unknown, you have been warned.
[ 24.208785] apex: module is from the staging directory, the quality is unknown, you have been warned.
[ 24.219663] hailo: Init module. driver version 4.18.0
[ 24.232253] device-mapper: tier-algo: dm_tier_algo_register: algorithm hro registration success
[ 24.243226] flashcache: flashcache-3.1.1-7.8 initialized
[ 24.258096] drbd: initialized. Version: 8.4.11 (api:1/proto:86-101)
[ 24.264393] drbd: srcversion: 9E5F0EC78F239E476E6D587
[ 24.269544] drbd: registered as block device major 147
[ 24.304970] i2c_gpio exist, insert qm2-i2c driver...
[ 24.310965] gpio-295 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 24.320094] gpio-296 (i2c-gpio.32): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 24.329821] i2c-gpio i2c-gpio.32: using lines 295 (SDA) and 296 (SCL)
[ 24.336285] qm2_i2c_init : Find 111d:1812. SDA 1 SCL 0
[ 24.341535] gpio-293 (sda): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 24.350510] gpio-294 (i2c-gpio.33): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 24.360228] i2c-gpio i2c-gpio.33: using lines 293 (SDA) and 294 (SCL)
[ 24.366691] qm2_i2c_init : Find 111d:1812. SDA 1 SCL 0
[ 24.372878] usbcore: registered new interface driver cdc_ether
[ 24.379679] usbcore: registered new interface driver rndis_host
[ 24.387675] Check proc_name[usb-storage].
[ 24.388787] ---- hal_boot start
[ 24.391705] scsi 38:0:0:0: Direct-Access asmedia ASM1153E 0 PQ: 0 ANSI: 6
[ 24.403204] Check proc_name[usb-storage].
[ 24.407256] Check proc_name[usb-storage].
[ 24.411278] Check proc_name[usb-storage].
[ 24.415320] Check proc_name[usb-storage].
[ 24.415616] sd 38:0:0:0: [sdg] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 24.419386] sd 38:0:0:0: Attached scsi generic sg6 type 0
[ 24.427178] sd 38:0:0:0: [sdg] 4096-byte physical blocks
[ 24.432694] Check proc_name[usb-storage].
[ 24.438118] sd 38:0:0:0: [sdg] Write Protect is off
[ 24.446822] sd 38:0:0:0: [sdg] Mode Sense: 43 00 00 00
[ 24.447132] sd 38:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.486579] sdg: sdg1
[ 24.489726] sd 38:0:0:0: [sdg] Attached SCSI disk
[ 24.494443] Check proc_name[usb-storage].
[ 24.498460] Check proc_name[usb-storage].
[ 25.569353] random: crng init done
[ 27.584996] igc 0000:08:00.0 eth0_tmp_372702: renamed from eth0
[ 27.591082] igc 0000:0c:00.0 eth1_tmp_378833: renamed from eth1
[ 27.597103] igc 0000:08:00.0 eth1: renamed from eth0_tmp_372702
[ 27.603132] igc 0000:0c:00.0 eth0: renamed from eth1_tmp_378833
[ 27.619020] ---- boot_pd=[/dev/mmcblk0p]
[ 33.071468] EXT2-fs (mmcblk0p5): warning: mounting unchecked fs, running e2fsck is recommended
[ 33.080510] ext2 filesystem being mounted at /mnt/boot_config supports timestamps until 2038 (0x7fffffff)
[ 33.095286] init_check: Check 10g nic = 0
[ 33.186758] usbcore: registered new interface driver pl2303
[ 33.192368] usbserial: USB Serial support registered for pl2303
[ 33.199463] usbcore: registered new interface driver cdc_acm
[ 33.205149] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 33.214108] jnl: driver (UFSD_HEAD UFSD_HEAD_r340892_b48) loaded at 00000000d7c108c6
[ 33.223481] ufsd: module license 'Commercial product' taints kernel.
[ 33.229863] Disabling lock debugging due to kernel taint
[ 33.236383] ufsd: driver (UFSD_HEAD UFSD_HEAD_r340892_b48, acl, sd2(5), tr, car) loaded at 00000000e9289b97
[ 33.236383] NTFSJ support included
[ 33.236383] exFAT support included
[ 33.236383] Hfs+J support included
[ 33.236383] Build_for__QNAP_Autobuild_2021-03-05_UFSD_HEAD_r340892_b48
[ 33.262787] ufsd: PAGE_SIZE=4K, THREAD_SIZE=16k
[ 33.267327] ufsd: Kernel .config hash: original 0x2feb9717, current can't check.
[ 33.274725] ufsd: Kernel .config hash: original 0x2feb9717, current can't check
[ 33.287279] ret = 0.
[ 33.289525] Without matche BIOS.
[ 33.426278] udevd[3151]: starting version 182
[ 38.555500] QM2 workaround applied!
[ 38.607947] ---- JBODEBUG : TL-Rxx00PES JBOD not found. Return!
[ 38.681532] ext2 filesystem being mounted at /tmp/nasconfig_tmp supports timestamps until 2038 (0x7fffffff)
[ 40.345411] EXT4-fs (sdf1): mounting ext3 file system using the ext4 subsystem
[ 40.452351] ext4_init_reserve_inode_table0: sdf1, 5
[ 40.457254] ext4_init_reserve_inode_table2: sdf1, 5, 0, 0, 4096
[ 40.463402] EXT4-fs (sdf1): 2 orphan inodes deleted
[ 40.468305] EXT4-fs (sdf1): recovery complete
[ 40.483269] EXT4-fs (sdf1): mounted filesystem (<none>) with ordered data mode. Opts: data=ordered
[ 40.495181] EXT4-fs (device sdf1): ext4lazyinit exit. (unregister path)
[ 40.836434] EXT4-fs (sdf1): mounting ext3 file system using the ext4 subsystem
[ 40.850160] ext4_init_reserve_inode_table0: sdf1, 5
[ 40.855079] ext4_init_reserve_inode_table2: sdf1, 5, 0, 0, 4096
[ 40.861050] EXT4-fs (sdf1): mounted filesystem (<none>) with ordered data mode. Opts: (null)
[ 40.886643] EXT4-fs (device sdf1): ext4lazyinit exit. (unregister path)
[ 41.233270] EXT4-fs (nvme0n1p1): mounting ext3 file system using the ext4 subsystem
[ 41.252954] ext4_init_reserve_inode_table0: nvme0n1p1, 5
[ 41.258284] ext4_init_reserve_inode_table2: nvme0n1p1, 5, 0, 0, 4096
[ 41.264828] EXT4-fs (nvme0n1p1): 2 orphan inodes deleted
[ 41.270181] EXT4-fs (nvme0n1p1): recovery complete
[ 41.276495] EXT4-fs (nvme0n1p1): mounted filesystem (<none>) with ordered data mode. Opts: (null)
[ 41.379470] EXT4-fs (device nvme0n1p1): ext4lazyinit exit. (unregister path)
[ 41.641720] EXT4-fs (sdd1): mounting ext3 file system using the ext4 subsystem
[ 41.739500] ext4_init_reserve_inode_table0: sdd1, 5
[ 41.744392] ext4_init_reserve_inode_table2: sdd1, 5, 0, 0, 4096
[ 41.750484] EXT4-fs (sdd1): 2 orphan inodes deleted
[ 41.755374] EXT4-fs (sdd1): recovery complete
[ 41.806656] EXT4-fs (sdd1): mounted filesystem (<none>) with ordered data mode. Opts: (null)
[ 41.862543] EXT4-fs (device sdd1): ext4lazyinit exit. (unregister path)
[ 42.072134] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[ 42.167846] ext4_init_reserve_inode_table0: sdb1, 5
[ 42.172744] ext4_init_reserve_inode_table2: sdb1, 5, 0, 0, 4096
[ 42.178837] EXT4-fs (sdb1): 2 orphan inodes deleted
[ 42.183910] EXT4-fs (sdb1): recovery complete
[ 42.225935] EXT4-fs (sdb1): mounted filesystem (<none>) with ordered data mode. Opts: (null)
[ 42.281798] EXT4-fs (device sdb1): ext4lazyinit exit. (unregister path)
[ 42.668415] EXT4-fs (sde1): mounting ext3 file system using the ext4 subsystem
[ 42.775555] ext4_init_reserve_inode_table0: sde1, 5
[ 42.780647] ext4_init_reserve_inode_table2: sde1, 5, 0, 0, 4096
[ 42.786725] EXT4-fs (sde1): 2 orphan inodes deleted
[ 42.791642] EXT4-fs (sde1): recovery complete
[ 42.806590] EXT4-fs (sde1): mounted filesystem (<none>) with ordered data mode. Opts: (null)
[ 42.835500] EXT4-fs (device sde1): ext4lazyinit exit. (unregister path)
[ 43.140682] EXT4-fs (sdc1): mounting ext3 file system using the ext4 subsystem
[ 43.239215] ext4_init_reserve_inode_table0: sdc1, 5
[ 43.244106] ext4_init_reserve_inode_table2: sdc1, 5, 0, 0, 4096
[ 43.250249] EXT4-fs (sdc1): 2 orphan inodes deleted
[ 43.255133] EXT4-fs (sdc1): recovery complete
[ 43.305598] EXT4-fs (sdc1): mounted filesystem (<none>) with ordered data mode. Opts: (null)
[ 43.361473] EXT4-fs (device sdc1): ext4lazyinit exit. (unregister path)
[ 43.727219] EXT4-fs (nvme1n1p1): mounting ext3 file system using the ext4 subsystem
[ 43.746830] ext4_init_reserve_inode_table0: nvme1n1p1, 5
[ 43.752351] ext4_init_reserve_inode_table2: nvme1n1p1, 5, 0, 0, 4096
[ 43.759085] EXT4-fs (nvme1n1p1): 2 orphan inodes deleted
[ 43.764418] EXT4-fs (nvme1n1p1): recovery complete
[ 43.770739] EXT4-fs (nvme1n1p1): mounted filesystem (<none>) with ordered data mode. Opts: (null)
[ 43.873058] EXT4-fs (device nvme1n1p1): ext4lazyinit exit. (unregister path)
[ 44.056466] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 44.144541] ext4_init_reserve_inode_table0: sda1, 5
[ 44.149488] ext4_init_reserve_inode_table2: sda1, 5, 0, 0, 4096
[ 44.155571] EXT4-fs (sda1): 2 orphan inodes deleted
[ 44.160471] EXT4-fs (sda1): recovery complete
[ 44.221219] EXT4-fs (sda1): mounted filesystem (<none>) with ordered data mode. Opts: (null)
[ 44.277103] EXT4-fs (device sda1): ext4lazyinit exit. (unregister path)
[ 44.507828] md: md9 stopped.
[ 44.516979] md/raid1:md9: active with 8 out of 128 mirrors
[ 44.547201] md9: detected capacity change from 0 to 542769152
[ 44.688815] EXT4-fs (md9): mounting ext3 file system using the ext4 subsystem
[ 44.709965] ext4_init_reserve_inode_table0: md9, 5
[ 44.714778] ext4_init_reserve_inode_table2: md9, 5, 0, 0, 4096
[ 44.720703] EXT4-fs (md9): mounted filesystem (<none>) with ordered data mode. Opts: data=ordered
[ 45.078568] md: md13 stopped.
[ 45.086652] md/raid1:md13: active with 8 out of 128 mirrors
[ 45.133907] md13: detected capacity change from 0 to 469893120
[ 49.117916] ---- hal_daemon start. (pid=5639)
[ 49.174355] ---- enc_id = 0, heat = TFAN SYS
[ 49.178714] ---- Fan Full Speed Threshold (super_crit_temp1) = 60
[ 49.184939] ---- Fan Turbo High Speed Threshold (critical_temp) = 50
[ 49.191357] ---- Fan High Speed Threshold (hyst_temp_high) = 45
[ 49.197333] ---- Fan Low Speed Threshold (hyst_temp_low) = 40
[ 49.211220] ---- enc_id = 0, heat = TFAN CPU
[ 49.215604] ---- Fan Full Speed Threshold (super_crit_temp1) = 80
[ 49.221741] ---- Fan Turbo High Speed Threshold (critical_temp) = 70
[ 49.228131] ---- Fan High Speed Threshold (hyst_temp_high) = 65
[ 49.234084] ---- Fan Low Speed Threshold (hyst_temp_low) = 55
[ 49.249099] ---- enc_id = 0, heat = TFAN DISK
[ 49.253566] ---- Fan Full Speed Threshold (super_crit_temp1) = 55
[ 49.259740] ---- Fan Turbo High Speed Threshold (critical_temp) = 70
[ 49.266156] ---- Fan High Speed Threshold (hyst_temp_high) = 52
[ 49.272148] ---- Fan Low Speed Threshold (hyst_temp_low) = 47
[ 49.312477] link_pd_wakeup_obj: pd_wakeup_info[0] link success
[ 49.312480] set_wakeup_policy: wakeup_policy[0]=3
[ 49.317199] get_pd_wakeup_stage_by_policy: policy=3
[ 49.322094] udp_receive: set wakeup_policy=3, wakeup_interval=0, enc_id=0
[ 50.378084] md/raid1:md321: active with 1 out of 2 mirrors
[ 50.384256] md321: detected capacity change from 0 to 7937261568
[ 50.423248] Adding 7751228k swap on /dev/md321. Priority:-2 extents:1 across:7751228k FS
[ 50.458629] md: recovery of RAID array md321
[ 50.462928] md: Recovering started: md321
[ 50.466946] md/raid:md321: report qnap hal event: type = HAL_EVENT_RAID, action = REBUILDING_START
[ 50.475920] md/raid:md321: report qnap hal event: raid_id=321, pd_name=/dev/(null), spare=/dev/(null), pd_repair_sector=0
[ 50.543154] link_pd_wakeup_obj: pd_wakeup_info[23] link success
[ 50.543157] set_wakeup_policy: wakeup_policy[23]=2
[ 50.547974] get_pd_wakeup_stage_by_policy: policy=2
[ 50.552934] udp_receive: set wakeup_policy=2, wakeup_interval=0, enc_id=23
[ 52.115036] md/raid1:md256: active with 2 out of 2 mirrors
[ 52.132871] md256: detected capacity change from 0 to 542834688
[ 52.188247] Adding 530108k swap on /dev/md256. Priority:-3 extents:1 across:530108k FS
[ 52.750297] md/raid1:md322: active with 2 out of 2 mirrors
[ 52.766606] md322: detected capacity change from 0 to 6863519744
[ 52.805246] Adding 6702652k swap on /dev/md322. Priority:-4 extents:1 across:6702652k FS
[ 53.165064] md: md1 stopped.
[ 53.171039] md/raid1:md1: not clean -- starting background reconstruction
[ 53.177843] md/raid1:md1: active with 2 out of 2 mirrors
[ 53.183194] md1: detected capacity change from 0 to 11989942075392
[ 53.189791] md: resync of RAID array md1
[ 53.193805] md: Resyncing started: md1
[ 53.197574] md/raid:md1: report qnap hal event: type = HAL_EVENT_RAID, action = RESYNCING_START
[ 53.206277] md/raid:md1: report qnap hal event: raid_id=1, pd_name=/dev/(null), spare=/dev/(null), pd_repair_sector=0
[ 53.287400] md: md1: resync interrupted.
[ 53.321631] md: Resyncing skipped: md1
[ 53.325390] md/raid:md1: report qnap hal event: type = HAL_EVENT_RAID, action = RESYNCING_SKIP
[ 53.334011] md/raid:md1: report qnap hal event: raid_id=1, pd_name=/dev/(null), spare=/dev/(null), pd_repair_sector=0
[ 53.664422] md: md2 stopped.
[ 53.670477] md/raid:md2: device sdc3 operational as raid disk 0
[ 53.676421] md/raid:md2: device sdb3 operational as raid disk 3
[ 53.682347] md/raid:md2: device sda3 operational as raid disk 2
[ 53.688292] md/raid:md2: device sdd3 operational as raid disk 1
[ 53.698804] md/raid:md2: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 53.706341] md2: detected capacity change from 0 to 11971778838528
[ 53.867351] md: md3 stopped.
[ 53.872823] md/raid1:md3: active with 1 out of 1 mirrors
[ 53.878175] md3: detected capacity change from 0 to 1791184338944
[ 53.951276] md: md4 stopped.
[ 53.956742] md/raid1:md4: active with 1 out of 1 mirrors
[ 53.962134] md4: detected capacity change from 0 to 1791184338944
[ 54.174298] drbd r1: Starting worker thread (from drbdsetup-84 [5969])
[ 54.181200] block drbd1: disk( Diskless -> Attaching )
[ 54.186626] drbd r1: Method to ensure write ordering: flush
[ 54.192211] block drbd1: max BIO size = 524288
[ 54.196680] block drbd1: drbd_bm_resize called with capacity == 23417849400
[ 54.204143] block drbd1: resync bitmap: bits=22868994 words=357329 pages=698
[ 54.211252] block drbd1: size = 11 TB (11708924700 KB)
[ 54.258722] block drbd1: recounting of set bits took additional 1 jiffies
[ 54.265520] block drbd1: 11 TB (22868994 bits) marked out-of-sync by on disk bit-map.
[ 54.273369] block drbd1: Suspended AL updates
[ 54.277746] block drbd1: disk( Attaching -> UpToDate )
[ 54.282988] block drbd1: attached to UUIDs C75031EE4DAB74FA:0000000000000004:0000000000000000:0000000000000000
[ 54.298006] drbd r1: conn( StandAlone -> Unconnected )
[ 54.303265] drbd r1: Starting receiver thread (from drbd_w_r1 [5970])
[ 54.309752] drbd r1: receiver (re)started
[ 54.313797] drbd r1: conn( Unconnected -> WFConnection )
[ 55.329935] drbd r1: conn( WFConnection -> Disconnecting )
[ 55.329944] drbd r1: Discarding network configuration.
[ 55.340829] drbd r1: Connection closed
[ 55.344593] drbd r1: conn( Disconnecting -> StandAlone )
[ 55.350059] drbd r1: receiver terminated
[ 55.353990] drbd r1: Terminating drbd_r_r1
[ 55.356805] block drbd1: role( Secondary -> Primary )
[ 55.495093] drbd r2: Starting worker thread (from drbdsetup-84 [6004])
[ 55.501831] block drbd2: disk( Diskless -> Attaching )
[ 55.507191] drbd r2: Method to ensure write ordering: flush
[ 55.512776] block drbd2: max BIO size = 524288
[ 55.517269] block drbd2: drbd_bm_resize called with capacity == 23382374328
[ 55.524712] block drbd2: resync bitmap: bits=22834350 words=356787 pages=697
[ 55.531794] block drbd2: size = 11 TB (11691187164 KB)
[ 55.558765] block drbd2: recounting of set bits took additional 1 jiffies
[ 55.565576] block drbd2: 11 TB (22834350 bits) marked out-of-sync by on disk bit-map.
[ 55.573429] block drbd2: Suspended AL updates
[ 55.577809] block drbd2: disk( Attaching -> UpToDate )
[ 55.583084] block drbd2: attached to UUIDs D4E5AD9E6D6D9954:0000000000000004:0000000000000000:0000000000000000
[ 55.606316] drbd r2: conn( StandAlone -> Unconnected )
[ 55.611606] drbd r2: Starting receiver thread (from drbd_w_r2 [6005])
[ 55.618165] drbd r2: receiver (re)started
[ 55.622210] drbd r2: conn( Unconnected -> WFConnection )
[ 56.638416] drbd r2: conn( WFConnection -> Disconnecting )
[ 56.638426] drbd r2: Discarding network configuration.
[ 56.649211] drbd r2: Connection closed
[ 56.652980] drbd r2: conn( Disconnecting -> StandAlone )
[ 56.658395] drbd r2: receiver terminated
[ 56.662327] drbd r2: Terminating drbd_r_r2
[ 56.669266] block drbd2: role( Secondary -> Primary )
[ 56.735138] drbd r3: Starting worker thread (from drbdsetup-84 [6039])
[ 56.742197] block drbd3: disk( Diskless -> Attaching )
[ 56.747521] drbd r3: Method to ensure write ordering: flush
[ 56.753114] block drbd3: max BIO size = 524288
[ 56.757603] block drbd3: drbd_bm_resize called with capacity == 3498405816
[ 56.764550] block drbd3: resync bitmap: bits=3416412 words=53382 pages=105
[ 56.771468] block drbd3: size = 1668 GB (1749202908 KB)
[ 56.778530] block drbd3: recounting of set bits took additional 0 jiffies
[ 56.785372] block drbd3: 1668 GB (3416412 bits) marked out-of-sync by on disk bit-map.
[ 56.793304] block drbd3: Suspended AL updates
[ 56.797673] block drbd3: disk( Attaching -> UpToDate )
[ 56.802913] block drbd3: attached to UUIDs 67ED5B1976FD400E:0000000000000004:0000000000000000:0000000000000000
[ 56.814198] drbd r3: conn( StandAlone -> Unconnected )
[ 56.819463] drbd r3: Starting receiver thread (from drbd_w_r3 [6040])
[ 56.825963] drbd r3: receiver (re)started
[ 56.830000] drbd r3: conn( Unconnected -> WFConnection )
[ 57.846355] drbd r3: conn( WFConnection -> Disconnecting )
[ 57.846364] drbd r3: Discarding network configuration.
[ 57.859323] drbd r3: Connection closed
[ 57.863106] drbd r3: conn( Disconnecting -> StandAlone )
[ 57.868572] drbd r3: receiver terminated
[ 57.872555] drbd r3: Terminating drbd_r_r3
[ 57.879724] block drbd3: role( Secondary -> Primary )
[ 57.912365] drbd r4: Starting worker thread (from drbdsetup-84 [6072])
[ 57.919204] block drbd4: disk( Diskless -> Attaching )
[ 57.924688] drbd r4: Method to ensure write ordering: flush
[ 57.930282] block drbd4: max BIO size = 524288
[ 57.934753] block drbd4: drbd_bm_resize called with capacity == 3498405816
[ 57.941708] block drbd4: resync bitmap: bits=3416412 words=53382 pages=105
[ 57.948615] block drbd4: size = 1668 GB (1749202908 KB)
[ 57.954967] block drbd4: recounting of set bits took additional 0 jiffies
[ 57.961771] block drbd4: 1668 GB (3416412 bits) marked out-of-sync by on disk bit-map.
[ 57.969729] block drbd4: Suspended AL updates
[ 57.974133] block drbd4: disk( Attaching -> UpToDate )
[ 57.979365] block drbd4: attached to UUIDs 97592E46C45DD622:0000000000000004:0000000000000000:0000000000000000
[ 57.990725] drbd r4: conn( StandAlone -> Unconnected )
[ 57.995986] drbd r4: Starting receiver thread (from drbd_w_r4 [6073])
[ 58.002537] drbd r4: receiver (re)started
[ 58.006626] drbd r4: conn( Unconnected -> WFConnection )
[ 59.021286] drbd r4: conn( WFConnection -> Disconnecting )
[ 59.021295] drbd r4: Discarding network configuration.
[ 59.032101] drbd r4: Connection closed
[ 59.035873] drbd r4: conn( Disconnecting -> StandAlone )
[ 59.041321] drbd r4: receiver terminated
[ 59.045259] drbd r4: Terminating drbd_r_r4
[ 59.051847] block drbd4: role( Secondary -> Primary )
[ 60.532822] echo (6130): drop_caches: 1
[ 61.503247] device-mapper: thin metadata: __create_persistent_data_objects: block manger get correctly
[ 61.705136] device-mapper: tier: Data device (dm-4) discard unsupported: Disabling discard passdown.
[ 61.714283] device-mapper: tier: passdown_tier_discard:4054, tier discard_passdown(0)
[ 61.722215] device-mapper: thin metadata: dm_pool_set_mapped_threshold: threshold: 0 total_mapped_blocks: 16777216 new_threshold: 22506024
[ 61.734650] device-mapper: thin: maybe_resize_data_dev: expand pool origin max threshold to 22506024
[ 62.858197] device-mapper: thin metadata: dm_pool_set_mapped_threshold: threshold: 22506024 total_mapped_blocks: 16777216 new_threshold: 22506024
[ 65.156027] device-mapper: thin metadata: __create_persistent_data_objects: block manger get correctly
[ 65.249247] device-mapper: tier: Data device (dm-12) discard unsupported: Disabling discard passdown.
[ 65.258480] device-mapper: tier: passdown_tier_discard:4054, tier discard_passdown(0)
[ 65.266419] device-mapper: thin metadata: dm_pool_set_mapped_threshold: threshold: 0 total_mapped_blocks: 22467328 new_threshold: 22469456
[ 65.278845] device-mapper: thin: maybe_resize_data_dev: expand pool origin max threshold to 22469456
[ 66.623515] device-mapper: thin metadata: dm_pool_set_mapped_threshold: threshold: 22469456 total_mapped_blocks: 22467328 new_threshold: 22469456
[ 72.024896] ext4_init_reserve_inode_table0: dm-16, 9
[ 72.029875] ext4_init_reserve_inode_table2: dm-16, 9, 0, 0, 4096
[ 72.035978] EXT4-fs (dm-16): recovery complete
[ 72.048623] EXT4-fs (dm-16): mounted filesystem (<none>) with ordered data mode. Opts: data=ordered,barrier=1,nodelalloc
これらのハードウェアエラーについてGoogleで検索すると、常にAMD CPUに関する結果しか出てきませんでした（ここで組み込まれているRyzenと一致しています）
単なるバックグラウンドノイズかもしれませんが、サポートにチケットを開くのも良いかもしれません。
私の場合、QTS Heroファームウェアのバグであることが判明しました。ただし、全く同じエラーではありません。