The working NAS at this time TVS-671 failed to boot. Before it failed to boot it was updated with all latest firmware.
Error:
On monitor screen, display message:
0 early console in decompress_kernel
Decompressing Linux… Parsing ELF… done
Booting the kernel
On device builtin screen show:
System booting with moving cursor continuously
Not getting IP so QFinder Pro does not find this device. Not able to reinstall Firmware QTS 5.x
Its configuration is as follows:
BIOS show that Project Version is QW56IR15 with a Build Date of 03/03/2020.
DOM recovery images 1.3.0 (F_TVS-X71_20150706-1.3.0) are using to flush the DOM as per the QNAP NAS recovery URL using the bootable USB using Clonezilla.
Not sure why it hung to provide the console
Regarding your issue, please submit a support ticket so our Support Team can assist you further. Thanks!
Hello Steve,
Thank you Steve for reviewing.
The Support ticket is Q-202607-38387.
Getting suggestion to by the DOM before bying DOM like to understand following question.
Attached BIOS image show that Project Version is QW56IR15 with a Build Date of 03/03/2020. From one of QNAP forum they were mentioning, this means motherboard is running a newer, updated UEFI-only BIOS revision. The reason don’t see options like “Legacy Boot,” “CSM,” or “AHCI” is that this modern 2020 firmware drops legacy support entirely.
Looks like DOM recovery images 1.3.0 (F_TVS-X71_20150706-1.3.0) were built around 2015 and rely on a legacy MBR/CSM boot sequence. My thinking is in my TVS-671 2020 UEFI BIOS hands control over to that 2015 kernel, the kernel panics and freezes instantly because it cannot communicate with modern UEFI hardware calls. As you know better please confirm this as well.
The important is buying is easy but will this fix the issue what I have mentioned above.
I appreciate if you can looks into above question and clarify for better understanding.
Thank you,
-Sanjay**
**
After making the NAS boot with success able to update firmware as well.
Now when re-attached my hard drive NAS recognize existing RAID and 2 volumes as well.
Both volumes are unmounted. Need help to mount the volumes.
-Sanjay
What RAID devices are expected ?
Do a md_checker to see if the NAS knows of any