I tried accessing my NAS drives using Safari and Firefox but am unable to access them. I receive the following messages: [Screenshot 2025-12-07 at 10.15.34 AM] [Screenshot 2025-12-07 at 10.15.48 AM] The message about not connected to the Internet isn’t correct….I can access the internet and I …

And the screenshots above are from firefox?

No, those are from Safari. With Firefox, when I try to access them I didn’t get anything. However after closing out and checking before replying to you, I can access them using Firefox if I use “Firefox Suggest” links that I’ve used in the past. Given that the NAS units and drives are about 6-7 y…

The error is “navigation failed”, seemingly to indicate you can’t connect to 192.168.1.25. What is your IP and subnet? How are you connected to the NAS (switches, router, etc)? Basic functionality should work regardless of the age of the NAS. You could try a 3 second reset to put things back to de…

Hello people, please read the full browser error message: [image] The request made was http but it looks like your NAS is set up for https only. That’s likely your issue. So let’s step back and diagnose things: 1.) Do NOT just go and reset your NAS w/o trying a few things first. 2.) Make sure…

@NA9D , Thx for the quick reply…pls see my answers: 1.) Do NOT just go and reset your NAS w/o trying a few things first. Agreed. 2.) Make sure your computer’s IP network and subnet match that of the NAS. Yes, my IP network and subnet match that of the NAS. 3.) Can you find the NAS in Qfinder? …

What does the system administration tab of the control panel look like. Here is mine. I’m not forcing HTTPS. What does yours look like? [image]

@NA9D , Here are my two screens. One is identical to your’s except I have TLS version compatibility to 1.1 rather than 1.2 The second is completely different and I’m not sure why (other than I’m a novice and my have changed settings either inadvertently or for some unknown reason. [Screenshot 20…

@NA9D Here’s my setting for. the 2nd. Not sure why the first screenshot didn’t display the settings accurately. [Screenshot 2025-12-07 at 7.53.51 PM]

Hmm. I’m not entirely sure why your browsers are insisting on HTTPS. But I would suggest using TLS 1.2 instead of 1.1. I would not be surprised if Tahoe is insisting on it. How are you accessing the NAS since you said you can’t access it in the first message? Are you using HTTPS?

I changed it to TLS 1.2 but no change. I’m now using Firefox to access the NAS units. I had been able to do so with Safari until about three weeks ago. Only change is upgrading to Tahoe however I’ve checked the Privacy settings in Tahoe however they’re not different than what I had before.

QNAP Community

無法使用瀏覽器存取NAS硬碟

英文一般

qts

show post in topic

主頁
分類
守則
服務條款
隱私政策

Powered by Discourse, 建議開啟 JavaScript 瀏覽